How to Mine Bitcoin with CPU on Windows and Linux(Debian ...

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

My Beginnings

Images: https://imgur.com/a/tOFNhlJ

My Current Rack Setup

So, this is the first time I've ever done a post like this to homelab and I wanted to give as much detail as possible.
For this, i'm going to work my way left to right, top to bottom.
submitted by DevelopedLogic to homelab [link] [comments]

First home server; will my plan accomplish my goals?

I'm planning to build my first home server, and I'd love some feedback on my plans before I buy all the hardware. Can you folks help me with some feedback?
 
What I Want to Do with My Hardware
 
Constraints
 
Current Plan
 
Currently Planned Hardware
Type Item Price
CPU Intel - Xeon E5-2660 V2 2.2 GHz 10-Core Processor $192.97 @ PCM
CPU Intel - Xeon E5-2660 V2 2.2 GHz 10-Core Processor $192.97 @ PCM
CPU Cooler Noctua - NH-D14 SE2011 CPU Cooler $89.99 @ Amazon
CPU Cooler Noctua - NH-D14 SE2011 CPU Cooler $89.99 @ Amazon
Thermal Compound Thermal Grizzly - Aeronaut 3.9 g Thermal Paste $11.59 @ Amazon
Motherboard ASRock - EP2C602-4L/D16 SSI EEB Dual-CPU LGA2011 Motherboard $481.98 @ Newegg
Memory Crucial - 32 GB (2 x 16 GB) Registered DDR3-1866 Memory $159.99 @ Amazon
Storage Western Digital - Blue 1 TB 2.5" Solid State Drive $114.89 @ OutletPC
Storage Western Digital - Blue 1 TB 2.5" Solid State Drive $114.89 @ OutletPC
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Storage Western Digital - Red Pro 8 TB 3.5" 7200RPM Internal Hard Drive $140.00
Video Card Asus - GeForce GTX 1060 6GB 6 GB Strix Video Card $359.98 @ B&H
Case Phanteks - Enthoo Pro Tempered Glass ATX Full Tower Case $122.00 @ Amazon
Power Supply Corsair - HX Platinum 750 W 80+ Platinum Certified Fully Modular ATX Power Supply $99.99 @ Newegg
Sound Card Creative Labs - Sound Blaster Z 30SB150200000 OEM 24-bit 192 kHz Sound Card $90.77 @ OutletPC
Prices include shipping, taxes, rebates, and discounts
Total (before mail-in rebates) $3002.00
Mail-in rebates -$40.00
Total $2962.00
 
Hardware Notes
 
Budget
 
Other Notes
 
My main question is: will this hardware and software setup accomplish my goals?
My secondary question is: is any of my hardware unnecessary for my goals? are there better ways to eat this Reese's?
Thanks so much for all the help in advance, I've learned so much from this subreddit (and DataHoarding) already!
submitted by therightrook to homelab [link] [comments]

Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers

Hello Vertcoin Community,
Eager to contribute to the Vertcoin Community I began creating step by step walkthrough guides on how to get a Vertcoin node up and running on a Raspberry Pi, Raspberry Pi Zero and Intel NUC. Along with information to get a Vertcoin node up and running was also optional steps to install p2pool-vtc.
I decided that while this step by step guide might be helpful to a few, a setup script may prove to be useful to a wider range of people. I have this script to a point where I think it may be productive to share with a bigger audience, for those who are brave and have this hardware sitting around or like to tinker with projects; I invite you to test this setup script if you are interested, if you run into errors any sort of verbose console output of the error proves to be extremely helpful in troubleshooting.
The script was designed to produce a “headless” server... meaning we will not be using a GUI to configure Vertcoin or check to see how things are running. In fact, once the server is set up, you will only interact with it using command line calls over SSH. The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Why run a headless node on a Single Board Computer?
The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Required: USB Flash Drive 6GB - 32GB
Please note that the script was designed for Single Board Computers first and looks for an accessible USB Flash Drive to use for storing the blockchain and swap file, as constant writing to a microSD can degrade the health of the microSD.
Supports

Hardware

All of the hardware listed above is hardware that I have personally tested / am testing on myself. The plan is to continue expanding my arsenal of single board computers and continue to add support for more hardware to ensure as much compatibility as possible.
Functionality
It is worth noting that LIT can be ran with multiple configurations, the ones displayed in the Post Installation Report reflect values that run LIT with the Vertcoin Mainnet. Please be aware that the Vertcoin Testnet chain has not been mined 100% of the time in the past, if you make transactions on the Vertcoin testnet that do not go through it is likely because the chain has stopped being mined.
BE CAREFUL WITH YOUR COINS, ONLY TEST WITH WHAT YOU ARE OKAY WITH LOSING IF YOU USE THE MAINNET.

Vertcoin Testnet Coins

https://tvtc.blkidx.org/faucet/
I've included some documentation on LIT I created which includes information I found to be useful: https://github.com/e-corp-sam-sepiol/vertnode/blob/mastedocs/lit.md
Please visit the mit-dci/lit github repository for the most up to date information on lit: https://github.com/mit-dci/lit

Vertnode | Automated Vertcoin Node Installation Script

https://github.com/e-corp-sam-sepiol/vertnode

Recommended: Use Etcher to install the chosen OS to your microSD card / USB flash drive.

If you intend on installing Ubuntu Server 16.04 to your Intel NUC please use Etcher to install the .iso to your USB flash drive.
https://etcher.io/
PLEASE NOTE THIS SCRIPT MAY GIVE AN ERROR. THIS IS THE NATURE OF TESTING. PLEASE REPORT YOUR ERRORS IF YOU WANT THEM TO BE FIXED/RESOLVED. THANK YOU FOR BETTERING THE DEVELOPMENT OF THIS SCRIPT.

Ubuntu Server 16.04 Setup Details

You can use different clients to ssh into your node. One option is using PuTTY or Git Bash on Windows which is included in the desktop version of Git. If you are using Linux you can simply open a new terminal window and ssh to the IP address of your node (hardware you intend installing the Vertcoin node on).
You will need to know the IP address of your node, this can be found on your router page.
ssh 192.168.1.5 -l pi For example, this command uses ssh to login to 192.168.1.5 using the -l login name of pi. The IP address of your node will likely be different for you, in this example I am logging into a Raspberry Pi which has a default login name of pi.
A brief list of commands that can be used to check on the Vertcoin node status:
vertcoin-cli getblockchaininfo | Grab information about your blockchain
vertcoin-cli getblockcount | Grab the current count of blocks on your node
vertcoin-cli getconnectioncount | Grab the current count of connections to your node. A number of connections larger than 8 means that you have incoming connections to your node. The default settings are to make 8 outgoing connections. If you want incoming connections please port forward your Raspberry Pi in your Router settings page.
vertcoin-cli getpeerinfo | Grab the information about the peers you have connected to / are connected to
vertcoin-cli getnettotals | Grab network data, how much downloaded/upload displayed in bytes
tail -f ~/.vertcoin/debug.log | Output the latest lines in the Vertcoin debug.log to see verbose information about the Vertcoin daemon (ctrl+c to stop)
Thank you to all who have helped me and inspired me thus far, @b17z, @jamesl22, @vertcoinmarketingteam, @canen, @flakfired, @etang600, @BDF, @tucker178, @Xer0
This work is dedicated to the users of Vertcoin, thank you for making this possible.
7/20/2018 Thank you @CommodoreAmiga for the incredibly generous tip <3
You can reach me @Sam Sepiol#3396 on the Vertcoin Discord, here on reddit or @ [email protected]
submitted by ecorp-sam-sepiol to vertcoin [link] [comments]

PiHole 4.2.2 on Synology Docker - setup work for me

PiHole 4.2.2 on Synology Docker - setup work for me
I've setup Pihole on both Synology and Ubuntu with success (lucky me). While on Ubuntu was quite straightforward, on Synology needed some experiment.

I do not activate DHCP function on my Synology; my TPLink wifi router handles it without problem.

My Synology fixed IP is 192.168.2.4 (yours could be different)

On Synology, thanks to this website, https://servicemax.com.au/tips/pi-hole-v4-on-synology-in-docker-the-easy-way/ which gave me 99% success.

Please find below broad steps in setting Pihole version 4.2.2 (latest as at this article) on Synology DSM 6.xx docker:
  1. search Docker registry for 'Pihole', and choose and download 'Pihole/Pihole' which is the official docker from Pihole.
  2. Launch the Pihole image, and use the Advanced setting option to change port mapping and add some environment variables; also check autostart option
  3. Only changes made to the default Pihole container settings:
  • In Port Settings tab, fixed the port mapping for container port 80, 433 to any local port number (I use 8181 and 8182, respectively). For container port 53 tcp and udp, do use 53 for both (local port number must not be duplicated with the same local port numbers being used by other Synology services)
  • In Environment tab, I did two things:
    • change ServerIP value to my Synology fixed IP (192.168.2.4 for my synology)
    • add variable WEBPASSWORD and give your desired admin password (to override default Pihole password automatically)
  • To enter into the Pihole admin website, use this url: 192.168.2.4:8181/admin.

They are all the set up I did on my Synology.

On main Wifi Router
The other setup to do is to change default DNS servers on my main wifi router (TPLink). My ISP assigns DNS1 and DNS2 IP for my router, but the router allows me to manually change them. I changed only the DNS1 value to be my Synology fixed IP address, which is 192.168.2.4; and left the second DNS remains same. From this setup, all devices in my home will be using Pihole services automatically (filter out Ad, porn websites, bitcoin mining....). You may add more blacklist urls under Setting in Pihole admin page.
---------------------------------------------------------
If you don't want Pihole to filter ad for all your devices, you don't have to change the DNS on your main router. Instead, on the device you wish to have Pihole controlled, you can change the first DNS IP to be your Synology IP, mine is 192.168.2.4 (yours could be different); and keeps the second DNS as is (mine is my main router IP which is 192.168.2.1)

Once you completed the setup on both Synology and Router, log into Pihole admin page, see the statistics in Dashboard, it should display Total number of queries, queries blocked, etc... If no movement on these numbers, that means the setup was not right, you can check the Pihole container log on Synology (in DetailsLog tab).

Pihole container consumes only 0.1x% of my DS411+II Atom D525 CPU, and 300+/- MB ram (from 2GB total RAM). I also run full Calibre engine and content server docker without problem on it.

The Pihole on my Ubuntu will be my backup.

Ports mapping: change from Auto
Change ServerIP value and add variable WEBPASSWORD only
Enable auto-restart


Resources usage
submitted by europacafe to pihole [link] [comments]

How to get a public static ip for your local lightning node

My lightning node is a node that is running locally on my server hardware in my house down under, far from the New Jersey Digitalocean datacenter, which is what will come up if you look up the ip of the node. This is done via an OpenVPN tunnel from your local machine to a VPS. I am doing this by renting a VPS from Digitalocean for $20 a month (2 vCPUs, 2GB RAM) running Ubuntu 18.04. You can do this just as easily on a $5 a month VPS with 1 vCPU and 1GB RAM or even a $2.50 a month VPS from Vultr with 512MB RAM. I needed the extra power because I have many web services running there as well.
This setup allows me to have a highly available lightning node, not affected by my home IP address changing. If you are using a mobile connection or have a CGNAT, you wont be able to port forward for your lightning node. This setup allows you to do so. You can also use this to make a portable lightning node, which can get you a full lightning node wherever you have power and internet, without having to mess with network settings. If you don't want others to know your home IP, this is a good option for privacy.
  1. Setup a local lightning node, preferably on a linux machine. I followed the Raspibolt tu`ial (with some tweaks) on a 2 vCPU and 8GB RAM VM running Ubuntu 16.04.
  2. Get a VPS with a static IP address. Digitalocean and Vultr VPSs already are. This VPS wont need much power, so get the cheapest one you can.
  3. Secure the VPS. I used this tutorial. Essentially, setup a non root user, use ssh keys, and setup ufw. Also make sure to allow port 9735 through ufw for lightning. I also additionally made adjustments to the ssh config and installed fail2ban.
  4. Setup an OpenVPN server on the VPS. I used this tutorial.
  5. Install on OpenVPN client on the local linux machine and connect to the server. The tutorial from step 4 shows how to this. Keep this connected for step 6.
  6. SSH into the VPS and figure out the OpenVPN IP address of the client. It should be 10.8.0.x. To figure out the x, setup a simple python web server or something on the local machine on port 8000 or something and open the port on ufw in the local machine. Keep the OpenVPN connection, and use a new ssh session when accessing your local machine. Don't kill the OpenVPN connection, as it may complicate things when finding the ip.
    mkdir testweb
    cd testweb
    echo hello >> index.html
    sudo ufw allow 8000
    python -m SimpleHTTPServer 8000
  7. SSH back into the VPS. Run the curl command below, and try all the numbers between 2-10 for x. When you get hello as your output, then you found the right IP. I found mine at 6. You may have to try higher numbers, but this is unlikely. You can kill your python webserver on your local machine once you find it.
    curl 10.8.0.x:8000
  8. Once you have the IP, you want to make this static, so it doesn't change when you reconnect. This is done on the VPS side, so ssh back into the VPS. This tutorial worked for me. Just make sure to change values like the CommonName and and the IP to match yours (client1 and 10.8.0.x). If it doesn't work search "make openvpn ip static" and look around.
  9. SSH into your local machine, and make the OpenVPN connection persistent. You can kill the OpenVPN connection now. Doing this and this worked for me. If it doesn't work search "openvpn keepalive" or "openvpn auto connect linux" or "make openvpn connection persistent linux".
  10. Restart your local machine, and make sure it connects on boot. Do the python webserver test again, and make sure the same ip is shown on the VPS, and it is still accessible.
  11. SSH back into the VPS. Now, you have to port forward with iptables. you have to add the 2 lines below starting with -A PREROUTING in the same place in your /etc/ufw/before.rules file. Here is what mine looks like. Change the x to your OpenVPN IP. Do sudo ufw disable and sudo ufw enable to restart ufw to update your changes.
    *nat
    :POSTROUTING ACCEPT [0:0]
    -A PREROUTING -i eth0 -p tcp -m tcp --dport 9735 -j DNAT --to-destination 10.8.0.x:9735
    -A PREROUTING -i eth0 -p udp -m udp --dport 9735 -j DNAT --to-destination 10.8.0.x:9735
    -A POSTROUTING -s 10.8.0.0/8 -o eth0 -j MASQUERADE
    COMMIT
  12. SSH into your local machine. Change your lnd.conf to match with this setup, like changing the externalip. Here is what my config looks like, a slight tweak from the Raspibolt one:
    [Application Options]
    debuglevel=info
    maxpendingchannels=5
    alias=GCUBED [LND]
    color=#68F442
    listen=0.0.0.0:9735
    externalip=157.230.95.74:9735
    [Bitcoin]
    bitcoin.active=1
    bitcoin.mainnet=1
    bitcoin.node=bitcoind
    [autopilot]
    autopilot.active=1
    autopilot.maxchannels=5
    autopilot.allocation=0.6
  13. Do a sudo service lnd restart to restart lnd and apply the changes. Remember to do a lncli unlock after any restarts. Your lnd node should now have a public static ip. Look it up a few hours after you do this on 1ml, your ip should be the one of your VPS now.
I am monitoring this for free with uptimerobot. It will notify you if it has gone down. So far mine has been running for 3 days and hasn't gone down.
EDIT: Formatting
EDIT 2: The main reason I didn't use a ddns or a hidden service was mainly for high uptime, and low latency. I am planning on developing a lapp with this node and I didn't want to risk any downtime. Running lightning as a hidden service is a great idea as well, this tutorial shows how to achieve something similar with the clearnet.
EDIT 3: You can achieve a similar result from using TOR
submitted by ggelango to Bitcoin [link] [comments]

Small form factor for home server and Bitcoin node

Before I start, let me emphasize on the fact that this request is something probably quite unusual for this sub and I apologize if it doesn't belong here. If that's the case, please let me know.

What will you be doing with this PC? Be as specific as possible, and include specific games or programs you will be using.
I'm looking for a small, quiet and affordable computer which will run 24/7 in my house. The aim is to make it a personal server and a Bitcoin node (not for mining, just a node).
A Bitcoin node should run on hardware with good endurance, stable internet connection, a large storage and that can run for a long period of time.

What is your maximum budget before rebates/shipping/taxes?
300€

When do you plan on building/buying the PC? Note: beyond a week or two from today means any build you receive will be out of date when you want to buy.
Anytime during this summer.

What, exactly, do you need included in the budget? (ToweOS/monitokeyboard/mouse/etc)
I'm not sure if it's the right place but here are my criteria:

Which country (and state/province) will you be purchasing the parts in? If you're in US, do you have access to a Microcenter location?
France

If reusing any parts (including monitor(s)/keyboard/mouse/etc), what parts will you be reusing? Brands and models are appreciated.
I will use this computer as as server so via SSH after the install. I already own some spare monitors and peripherals.

Will you be overclocking? If yes, are you interested in overclocking right away, or down the line? CPU and/or GPU?
No

Are there any specific features or items you want/need in the build? (ex: SSD, large amount of storage or a RAID setup, CUDA or OpenCL support, etc)
As said earlier, I need a large storage for the Bitcoin node. I'm thinking about a 2TB NAS HDD so it can last for a very long time. The NAS variant of HDD is probably the one which suits my needs the most as the disk will be very frequently accessed and will run 24/7.

Do you have any specific case preferences (Size like ITX/microATX/mid-towefull-tower, styles, colors, window or not, LED lighting, etc), or a particular color theme preference for the components?
Mini ATX if possible. I'd prefer a small form factor. The most important part of the case is its protectiveness, the rest is not important.

Do you need a copy of Windows included in the budget? If you do need one included, do you have a preference?
No, I will install a linux distro.

Extra info or particulars:

I found the Odroid H2 and Odroid HC2 which fit my needs perfectly but they are either sold out, unavailable or have insanely high customs fees. Also I checked Intel NUCs but I'm not sure it is what I need, especially for the price. A Raspberry Pi is not a good choice because of the storage capabilities (connected by USB 2.0) and limited RAM.
I considered building a machine myself but I'm not sure which components to use, and where to buy them. This is why I came here and this is something I'm still open to, if the price is not too high.
submitted by ImAFlyingPancake to buildapcforme [link] [comments]

A response to the GRS Shill cries

First of all, I think it is right to say that it wouldn’t be fair for the recent reddit to be entirely attributed to the recent 130% rise in GRS price – The price has gone a lot higher when SegWit was activated and a lot higher in the runup to the previous release announcement (22nd September) and was arguably at the ‘floor’ when it was discovered by us.
I’d like to give a little bit of a backstory on the recent discovery of GRS by a small group of people in a hope you realise this isn’t just shilling some shit-coin for a pump and dump. It was never our intention to come across as shilling and certainly not our intention to attract ‘pump and dump’ groups. We merely searched for SegWit-activated coins, and the main one that kept popping up was Groestlcoin, in posts that didn’t even mention Litecoin or Vertcoin. We thought that it was worth investigating further and decided to do some more research, and the more we found we more we realised that this was a genuine diamond amongst the rocks. 254th in market cap, first to activate SegWit, Lightning Network in full development, the list was endless – and seemingly nobody knew about it which was insanity.
In several places we saw that no marketing was done or being actively planned, and it was up to the community to market the coin if they wanted to whilst the 20+ developers keep cracking on to try and be the first to more developments.
We contacted the lead developer, ‘Jackielove4u’ and started a plan to try and market the coin, first by creating a Discord channel for discussions and then by trying to get their great features out to the world and aim for slow-and-steady growth.
In hindsight, a bit more finesse would have been better and the reddit posts got a little out-of-hand, if I didn’t know any better I would have seen GRS as a coin being shilled too on Reddit, and I have accused people of doing the same with Vertcoin in the past. So I thought I’d try to clear up some misconceptions and give one targeted response post to the cries of shilling and try to give the facts to the best of my knowledge, whilst trying to give an unbias opinion as much as I can based on my views and the views of the response that we’ve had.
PROS:
• Segwit Enabled Enabled first)
• Low-Power Mining – This is a selling point but people have said the power consumption is on-par with Vertcoin. I think the mining uses 2 rounds of Groestl algorithm hashing to make it more secure but is still very low on power consumption and hardware wear
• Lightning Network currently in development
• They have had an easy miner solution since 2015 – Although I’d be the first to admit it is a little clunky, but is openly on Git for improvements.
• 3 iOS wallets (Including a shared wallet), 11 android wallets (1x Secure BIP147, 1x Including sending GRS via SMS, 1x ability to use NFC tags as encryption keys), 11 blackberry wallets (Secure), 3 web wallets and 10 desktop wallets with varying features / designs – More to come on the differences soon.
• Over 80 electrum servers
• Working testnet
• Hosts their own block explorer
• Officially maintained by the Bitcoin Debian packaging team
• Ubuntu PPA available
• ASIC resistant, profitable CPU and GPU mining (And has an ARM miner apparently!) We’re just brushing the surface of the great tech that is being developed by the GRS developers.
CONS:
• Elephant in the room – The name. People have called it ugly, most don’t know how to pronounce it (It’s Groosel-coin). The developers are open to a rebrand pending a community vote in 2018.
• I’ve heard a few times ‘that logo looks like a cross between google and wordpress’. Again the logo is open to rebrand/redesign pending a vote (open for suggestions/examples!) but there is some significance in it. The ‘2’ in the logo is for the 2 rounds of Groestl algorithm hashing that is used.
• Obviously little or no marketing up until this point. Marketing is important (if not vital) for the success of a coin so we’re trying to spread some awareness.
• Lots of internet posts saying that it is a scam coin. From what I can see it seems to be because the coin has been ‘pumped-and-dumped’ a few times? By that logic, most coins are scam coins? The block reward dropped 6% a week when it was first launched specifically to prevent pump-and-dumps.
• Rumours of a pre-mine of 0.2% (240,000 coins) when it was first created. I haven’t gotten to the bottom of this to confirm or deny, but if it was true it seems to have been given as rewards for some early marketing (where those odd naked women pictures come from) and some early bounty rewards to get the ball rolling. No pre-mine is ideal but its personally something I can look over now if it IS true.
• Over 70% of the mined coins are owned by the top 100 addresses. Again, this is clearly an issue that many other coins also are facing (albeit some to a lesser extent). I can only guess that the more time that passes being a lesser-known coin, the greater risk that this becomes as the same miners mine for a longer period of time. Not sure if this matters much but it’s also worth noting that 24% of the mined coins appear to be on Bittrex currently.
TL:DR – Trying not to shill GRS, just trying to get the word out. Criticisms about the coin have been noted by the developers and they are very open to change and improvements suggested if they are the popular vote. I recommend that you research more into the coin, coin the discord on https://discord.gg/8VURndr and make a decision based on your own research whether you'd see something in, and like to support the coin.
Apologies for such a long post..
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Small form factor for home server and Bitcoin node

Hello,

I'm looking for a small, quiet and affordable computer which will run 24/7 in my house. The aim is to make it a personal server and a Bitcoin node (not for mining, just a node). I found your community and thought it would be a good place to ask for some advice on what choices are available to me.

Here are my criteria:
- Decent CPU (I don't need something overly powerful but a snail is not desirable. I'd like something along the lines of a Raspberry Pi, or more, in terms of CPU power.)
- Support for any linux distro (By that I mean: "It can run linux". If there is some config to do I can do it. It will very likely be a 19.04 Ubuntu), no pre-installed OS.
- At least 2GB of RAM (Upgradablility would be a bonus. Buying the RAM separately and installing it myself is of course a possibility)
- Can use the hard drive of my choice (I will buy a 2TB NAS hard drive, 3.5 inches. 2.5 inches are ok too)
- Something quite quiet and which is not too hot when idle (which it will be most of the time)
- Low power if possible
- Because I want the thing to live for a long time, being able to install the OS on the HDD and not on an SD card
- A case protecting the internal components. I don't care if it's pretty or not, I just want it to be protective.
- Has Ethernet support (If it doesn't have wi-fi then it's perfect)
- I don't care about display output and graphical power, I won't install a desktop environment.
- Up to 300€ in total.

I found the Odroid H2 and Odroid HC2 which fit my needs perfectly but they are either sold out, unavailable or have insanely high customs fees. Also I checked Intel NUCs but I'm not sure it is what I need, especially for the price. A Raspberry Pi is not a good choice because of the storage capabilities (connected by USB 2.0) and limited RAM.
I considered building a machine myself but I'm not sure which components to use, and where to buy them. This is still something I'm open to, if the price is not too high.
submitted by ImAFlyingPancake to buildapc [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

Mega FAQ (Or: Please come here for your questions first)

Qbundle Guide (Step by step setup & Bootstrap) https://burstwiki.org/wiki/QBundle
1( I want to mine or activate My account. Where do find the multiple coins?
You only need 1, an outgoing transaction or reward reassignment will set the public key. Get them from:
https://www.reddit.com/burstcoinmining/comments/7q8zve/initial_burstcoin_requests/
Or (Faucet list)
https://faucet.burstpay.net/ (if this is empty, come back later)
http://faucet.burst-coin.es
Or
https://forums.getburst.net/c/new-members-introductions/getting-started-initial-burstcoin-requests
2( I bought coins on Bittrex and want to move to my new wallet, but can't. Why?
Bittrex will only send to accounts with a public key (not a Burst requirement) so see number 1 and either set the name on the account (IF you will not mine) or set the reward recipient to the pool. Either action will enable the account and allow for transfers from Bittrex.
3( I sent coins from Poloniex/anywhere to Bittrex and they don’t show up after a considerable time. Why?
You need to set an unencrypted message on the transaction, informing Bittrex which account to send the funds to (this is in the directions on Bittrex). Did you do this? Contact Bittrex support with all the details and eventually you will get your funds.
4( How much can I make on Burst?
https://explore.burst.cryptoguru.org/tool/calculate
Gives you an average over time assuming a few things like: Average luck/100% uptime/no overlapping/fees on pool/good plot scan time (<20 seconds) if you do not have all of these, you may not see that number.
5( If I use SSD’s would I make more money?
No, it’s 95% capacity and 5% scan time that determine success. More plot area = better deadlines = better chance of forging a block, or better rates from a pool.
6( What is ‘solo’ and ‘pool’ (wasn’t his name Chewbacca?)
Solo is where you attempt to ‘forge’ (mine) a block by yourself; you get 100% of the block reward and fees. But you only receive funds if you forge, no burst for coming in second place.
Pools allow a group of miners to ‘pool’ together their resources and when a miner wins, they give the pool the winnings (this is done by the reward assignment you completed earlier), it is then divided according to different percentages and methods and burst is sent out according to pool rules (minimum pay-out, time, etc.)
7( I have been mining for 2 days and my wallet doesn’t show any Burst WHY?
Mining solo: it is win-or-lose, nothing in between, and wining is luck and plot size. Pool mining: because it costs 1 burst to send burst, the pools have either a time requirement (every X days) or a minimum amount (100 burst +) so you need to research your pool. Some pools allow for you to set the limit (cryptoGuru and similar) to be met before sending
8( How do I see what I have pending?
On CryptoGuru, based pools, it’s the ‘Pending (burst)’ column, other pools, look for the numbers next to your burst ID. One is Paid and the other pending.
9( I’m part of a pool and I forged a block, but I didn’t recieve the total value of the block, why?
A pool has 2 basic numbers that denote the pay-out method, in the format ‘XX-XX’ (i.e. 50-50) The first number is the % paid to the block forger (miner) and the second is the retained value, which is paid to historic ‘shares’ (or, past blocks that the pool didn’t win, but had a miner that was ‘close’ to winning with a good submitted deadline)
Examples of pools:
0-100 (good for <40TB)
20-80 (30-80TB)
50-50 (60-200TB)
80-20 (150-250)
100-0 (solo mine, 150+ TB)
Please note that there is an overlap as this is personal preference and just guidance; a higher historical share value means a smoother pay-out regime, which some people prefer. If fees are not factored in, or are the same on different pools, the pay-out value will be the same over a long enough period.
10( Is XXX model of hard drive good? Which one do you recommend?
CHEAP is best. If you have 2 new hard drives, both covered by warranty, get the one with the lowest cost per TB (expressed as $/TB , calculated by dividing the cost by the number of terabytes) because plot size is KING,
11( How many drives can I have on my machine?
For best performance, you can have up to 2 drives per thread (3 on a new fast AVX2 CPU). So that quad-core core-2-quad can have up to 8 drives, but a more modern i7 with 4 cores + hyper threading can squeeze 8 * 3 or 24 drives. (Performance while scanning will suffer)
12( Can I game while I mine?
Some people have done so, but you cannot have the ‘maximum’ number of drives and play games generally.
13( Can I mine Burst and GPU mine other coins?
Yes, if you CPU Mine Burst.
14( I’m GPU plotting Burst and GPU mining another coin, my plots are being corrupted, why?
My advice is dedicating a GPU to either mining or plotting, don’t try to do both.
15( What is a ‘plot’?
A plot is a file that contains Hashes, these hashes are used to mine burst. A plot is tied to an account, but they can be created (with the same account ID) on other machines and connected back to your miner(s).
16( Where can I trade/buy/sell Burst?
A list of exchanges is maintained on https://www.reddit.com/burstcoin/ (on the right, ‘Exchanges’ tab) the biggest at the moment are Bittrex and Poloniex, some offer direct Fiat-to-Burst purchase (https://indacoin.com for example)
17( Do I have to store my Burst off the exchange?
No, but it’s safer from hackers who target exchanges, if you cannot guarantee the safety or security of your home computer from Trojans etc, then it might be best to leave on an exchange (but enable 2FA security on your account PLEASE!)
18( What security measures can I take to keep my coin safe?
When you create an account, sign out and back in to your wallet (to make sure you have copied the pass phrase correctly) and keep multiple copies of the key (at least one physically printed or written down and in a safe place, better in 2 places) do not disclose the passphrase to anyone. Finally use either a local wallet or a trusted web wallet (please research before using any web wallet)
19( How can I help Burst?
Run a wallet, which will act as a node (or if you’re a programmer, contact the Dev team Bring attention to burst (without ‘shilling’ or trying to get people to buy) And help translate into your local language
Be a productive member of the community and contribute experience and knowledge if you can, or help others get into Burst.
20( Will I get coins on the fork(s) and where will they be?
There will be no new coin, and no new coins to be given/air dropped etc, the forks are upgrades to burst and there will not be a ‘classic’ or ‘new’ burst.
21( Will I need to move my Burst off of the exchange for the fork?
No, your transactions are on the block chain, which will be used on the fork, they will be visible after the move; nothing will need to be done on your side.
22( Where can I read about the progress of Burst and news in general on the community?
There is no finer place than https://www.burstcoin.ist/
23( What are the communities for Burst and the central website?
Main website: https://www.burst-coin.org/
Reddit: https://www.reddit.com/burstcoin and https://www.reddit.com/burstcoinmining/
Burstforum.net: https://www.burstforum.net/
Getburst forum: https://forums.getburst.net/
Official Facebook channel: https://m.facebook.com/groups/398967360565392
(these are the forums that are known to be supporting the current Dev Team)
Other ways to talk to the community:
Discord: https://discordapp.com/invite/RPhpjVv
Telegram (General): https://t.me/burstcoin
Telegram (Mining): https://t.me/BurstCoinMining
24( When will Burst partner up with a company?
Burst is a currency, the USD does not ‘partner up’ with a company, the DEV team will not partner up and give over to special interests.
25( Why is the DEV team anonymous?
They prefer anonymity, as it allows them to work without constant scrutiny and questions unless they wish to engage, plus the aim is for Burst to become a major contender, and this brings issues with security. They will work and produce results, they owe you nothing and if you cannot see the vision they provide then please do not ‘invest’ for short term gain.
26( When moon/Lambo/$100/make me rich?
My crystal ball is still broken, come back to the FAQ later for answer (seriously, this is a coin to hold, if you want to day-trade, good luck to you)
27( How can I better educate myself and learn about Dymaxion?
Read about the Dymaxion here: https://www.reddit.com/burstcoin/wiki/dymaxion
28( My reads are slow, why?
There are many reasons for this, if your computer has a decent spec it’s likely due to USB3 hub issues, or plugging into a USB2 hub, but other reasons can be multiple plots in the same folder, but it’s best to visit the mining subreddit. They can help more than an simple FAQ https://www.reddit.com/burstcoinmining/
29( I have a great idea for Burst (not proof of stake related)?
Awesome! Please discuss with the DEV team on discord https://discordapp.com/invite/RPhpjVv
(Please be aware that this is a public forum, you need to find who to ask/tell)
30( I have a great idea for Burst (Proof of stake related)?
No. if you want a POS, find a POS coin. On the tangle which is being implemented a POS/POW/POC coin can be created, but BURST will always be POC mined. You are welcome to implement a proof of stake coin on this!
31( Will the Dev team burn any coins?
Burst is not an ICO, so any coins will need to be bought to be burnt. You are welcome to donate, but the DEV team have no intention of burning any coins, or increasing the coin cap.
32( When will there be an IOS wallet?
IOS wallet is completed; we are waiting for it to go on the app store. Apple is the delaying factor.
33( Why do overlapping plots matter?
Plots are like collections of lottery tickets (and if only one ticket could win). Having 2 copies is not useful, and it means that you have less coverage of ‘all’ the possible numbers. It’s not good, avoid.
34( My local wallet used to run, I synchronised it before and now it says ‘stopped’. when I start it, it stops after a few seconds, what should I do?
I suggest that you change the database type to portable MariaDB (on Qbundle, at the top, ‘Database’ select, ‘change database’) and then re-import the database from scratch (see 35)
35( Synchronising the block chain is slow and I have the patience of a goldfish. What can I do?
On Qbundle , ‘Database’ select ‘Bootstrap chain’ and make sure the CryptoGuru repository is selected, then ‘start Import’ this will download and quickly stuff the local database (I suggest Portable MariaDB, see 34) (lol, loop)
36( What will the block reward be next month/will the block rewards run out in 6 months?
https://www.ecomine.earth/burstblockreward/ Rewards will carry on into 2026, but transaction fees will be a bigger % by then, and so profitable mining will continue.
37( How can I get started with Burst (wallet/mining/everything) and I need it in a video
https://www.youtube.com/watch?v=LJLhw37Lh_8 Watch and be enlightened.
38( Can I mine on multiple machines with the same account?
Yes, if you want to pool mine this can be done (but be prepared for small issues like reported size being incorrect. Just be sure to keep question 33 in mind.)
39( Why do some of my drives take forever to plot?
Most likely they are SMR drives, it’s best to plot onto another SSD and then move the finished plot/part of a plot across to the SMR drive as this is much quicker. SMR drives are fine on the read, just random writes that are terrible.
So plot an SMR drive quickly, plot to a non SMR or better still SSD drive, in as big a chunk as possible (fewer files better) and move. a version of Xplotter, called Splotter, can do this easily.
https://github.com/NoParamedic/SPlotter
40( I have a great idea; why not get listed on more exchanges!!
Exchanges list coins because of 2 reasons:
  1. Clients email and REQUESTING Burst and provide details like:
    i. https://www.burst-coin.org/information-for-exchanges
  2. The coin pays (often A LOT, seriously we’ve been asked for 50 BTC)
I suggest you speak with your exchange and ask ‘when will they offer Burst?’
41( Do you have a roadmap?
https://www.burst-coin.org/roadmap
42( Why is the price of Burst going up/down/sideways/looping through time?
The price of burst is still quite dependent upon Bitcoin, meaning that if Bitcoin gains, the value of Burst gains, if Bitcoin drops then Burst also drops. If there is news for Burst then we will see something independent of Bitcoin moving. Variations can be because of people buying in bulk or selling in bulk. There are also ‘pump and dump’ schemes that we detest, that can cause spikes in price that have nothing to do with news or Bitcoin, just sad people taking advantage of others.
43( Where is the best place to go with my mining questions?
https://www.reddit.com/burstcoinmining/
or https://t.me/BurstCoinMining
44( What hardware do you advise me to buy, is this computer good?
See question 43 for specific questions on hardware, it depends on so many variables. The ‘best’ in my opinion is a 36 bay Supermicro storage server, usually they have dual 6-core CPU’s and space for 36 drives. No USB cables, plotting and mining monster, anything else, DYOR.
45( Where do you buy your hard drives?
I have bought most from EBay in job lots, and some refurbished drives with short warranties. Everything else I have bought, from Amazon.
46( Can I mine on my Google drive/cloud based storage?
In short: no. If you want to try, and get to maybe 1 TB and then find that your local connection isn’t fast enough, or that shortly after, your account is blocked for various reasons. Please be my guest.
47( Can I mine on my NAS?
Some you can mine with the NAS (if it can run the miner, it can scan locally) but generally they’re not very fast. good for maybe 16 TB? Having a plot on a NAS and mining from another computer depends on the network speed between the NAS and scanning computer. I believe you can scan about 8 TB (maybe a bit more) and keep the scan times to within acceptable, but YMMV.
48( How can I set up a node?
No need to set up a node, just set up a wallet (version 2.0.4) or Qbundle (2.2) and it will do the rest
49( Are the passphrases secured?
I’ll leave the effort to a few people to show how secure a 12-word passphrase is: https://burstforum.net/topic/4766/the-canary-burst-early-warning-system Key point: brute forcing it will be around 13,537,856,339,904,134,474,012,675,034 years.
50( I logged into my account (maybe with a different burst ID) and see no balance!!
I have dealt with this very issue multiple times, and there are only 3 options:
  1. You have typed in the password incorrectly
  2. You have copy-pasted the password incorrectly
  3. You are trying to log into a ‘local wallet’ which the block chain has not finished updating
The last one generally leaves the burst ID the same, but old balances will show. No, this is not a security problem, and yes, windows loves to add spaces after the phrase you enter when copied, and that space is important in getting to your account.
51( Are there channels for my language?
Telegram:
Spanish: https://t.me/burstcoin_es
German: https://t.me/Burstcoinde
Italian: https://t.me/BurstCoinItalia
Forum:
Spanish: https://burst-coin.es/index.php/forum/index
Discord:
Spanish: https://discordapp.com/invite/RaaGna9
Bulgarian: https://discord.gg/r4uzTd
(there are others, please contact me to put up)
52( I am mining in a pool, and it says that my effective capacity is lower than I actually have, why?
  1. If you've not been mining for >48 hours, or just added additional capacity, it will take time.
  2. The value fluctuates (normally, +-5% but can be up to 10% at times)
  3. Read on the ‘Quick info’ tab about adjusting your deadline to compensate for changes i. revisit once a month for best results
  4. If you have overlapping plots it will also be lower so be aware of this (see question 33)
53( What pool should I join?
First of all, read question 9, after you have understood that it depends on the size (and how patient you are) select from the following list: https://www.ecomine.earth/burstpools/
54( What miner to use?
I use Blago’s miner, there are many out there but Blago’s works for me on CPU mining, it can be found in Qbundle.
55( What Wallet to use (I use windows)?
Qbundle: https://github.com/PoC-Consortium/Qbundle/releases/ guide: https://burstwiki.org/wiki/QBundle
56( What Wallet to use (Linux)?
https://package.cryptoguru.org/ for Debian and Ubuntu, for Mac. read:
https://www.ecomine.earth/macoswalletinstallguide/
57( Will i need to 'replot' after POC2 (second fork) happens?
No, there will be a tool which will optimise, but it is not CPU intensive (it basically re-shuffles your plot) and is just IO intensive. You do not need to replot.
TurboPlotter and https://github.com/PoC-Consortium/Utilities/tree/mastepoc1to2.pl are tools that will/can be used to actuate optimization, but PLEASE wait with optimization until after the hard fork.
58( Will the transaction fee always be 1 burst?
No, dynamic fees are coming in the next fork.
submitted by dan_dares to burstcoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Solo mining for Gits and Shiggles

I run a full Bitcoin node. Lately I've been playing around with setting up solo mining with BFGMiner, just experimenting with CPUs and GPUs, in full knowledge its a purely academic thing with zero chance of succeeding, intending only to deepen my understanding of the system. Seems to work well, for the most part.
Except when I point my S9's at the pool, I only get about 250 GH instead of 13.5 TH each. I've made sure to turn off overt asciboost when I point them at my experiment, no effect, and they definitely are connected. Does anyone else play around with this stuff and might know the solution already?
FWIW: Ubuntu Bitcoin Core v0.17 BFGMiner v5.5.0
Bitcoin.conf, server, daemon, listen, and txindex set to 1. rpcuser and rpcpassword are set, rpcallowip and rpcport are all good(and proven as I can connect other pcs over the LAN just fine for cpu/gpu)
BFGMiner -o http://127.0.01:8332 -u user - pword --generate-to $address --coinbase-sig "LOL" --stratum-port:3333
Any suggestions?
submitted by NDragon951 to BitcoinMining [link] [comments]

Why is does it take so long to shut down an node used only as a JSON-RPC server?

I'm trying to sync a full node that will only be used as a JSON-RPC server (no mining). I tried to modify the config file and added a service unit, so that the node can run in a low-end VPS with minimum RAM and CPU capabilities. The problem is that the server takes too long to stop, and it's terminated by the system, so it always start rewinding blocks that have been already downloaded.
Here is my configuration file:
server=1 daemon=1 #debug=mempool debug=rpc # If run on the test network instead of the real bitcoin network # testnet=1 # You must set rpcuser and rpcpassword to secure the JSON-RPC api # Please make rpcpassword to something secure, `5gKAgrJv8CQr2CGUhjVbBFLSj29HnE6YGXvfykHJzS3k` for example. # Listen for JSON-RPC connections on  (default: 8332 or testnet: 18332) rpcuser=myuser rpcpassword=pypassword rpcport=8332 # Enable blocks pruning #prune=550 # Limit dbcache=50 maxconnections=4 rpcthreads=2 
And the service unit:
# It is not recommended to modify this file in-place, because it will # be overwritten during package upgrades. If you want to add further # options or overwrite existing ones then use # $ systemctl edit bitcoind.service # See "man systemd.service" for details. # Note that almost all daemon options could be specified in # /etc/bitcoin/bitcoin.conf [Unit] Description=Bitcoin daemon After=network.target [Service] ExecStart=/usbin/bitcoind -daemon=0 -datadir=/home/jsonrpc/bitcoin -conf=/home/jsonrpc/bitcoin/settings.conf ExecStop=/usbin/bitcoin-cli -datadir=/home/jsonrpc/bitcoin -conf=/home/jsonrpc/bitcoin/settings.conf stop # Creates /run/bitcoind owned by bitcoin #RuntimeDirectory=/home/jsonrpc/bitcoin WorkingDirectory=/home/jsonrpc/bitcoin User=jsonrpc Group=jsonrpc TimeoutStopSec=15m #CPUQuota=4% #MemoryLimit=128M #IOReadIOPSMax=10 #IOWriteIOPSMax=10 Type=simple #Restart=on-failure # Hardening measures #################### # Provide a private /tmp and /vatmp. PrivateTmp=true # Mount /usr, /boot/ and /etc read-only for the process. ProtectSystem=full # Disallow the process and all of its children to gain # new privileges through execve(). NoNewPrivileges=true # Use a new /dev namespace only populated with API pseudo devices # such as /dev/null, /dev/zero and /dev/random. PrivateDevices=true # Deny the creation of writable and executable memory mappings. # Commented out as it's not supported on Debian 8 or Ubuntu 16.04 LTS #MemoryDenyWriteExecute=true [Install] WantedBy=multi-user.target 
submitted by rraallvv to Bitcoin [link] [comments]

A moth just flew into my PSU ...

Hey everyone.
I’ve recently built a home server for samba shares and to practice Linux stuff. It is an old HP envy desktop tower that my companies old IT guy was probably using to mine bitcoin. I removed the graphics card and installed Ubuntu on it. (i5-4400, 12 GB DDR3, non-HP PSU, 2x 4 TB WD Reds, 1x 120 GB SSD)
I was working on it just now, in the dark, and a moth, probably about an inch long, flew to the blue-hue light that is the power supply, and got sucked into the fan. The PC is still on and still running, and I haven’t heard any bug noises from inside the PSU. The light for the PSU is very bright blue which is what probably attracted the moth. it’s some shitty Rosewill PSU that I intend on replacing anyway since I want this server to have 24/7 uptime.
But yeah since it was so old I added a new CPU fan, a 145mm Cryorig that didn’t fit in my workstation PC rig, but is also marginally too big for this one too. I am configuring mdadm RAID and have the OS on a SSD, and with adding the new fan, I’ve been messing about on the inside and I have it laying on its side, with the case-side off, with the PSU/cpu/mobo/etc exposed.
The side of the case has been left off and doesn’t even fit now that I tried to put it back on... CPU fan is about 3mm too tall.
But anyway, the moth was flittering in front of the PSU and got sucked in... I got some big downloads tonight, is this safe to leave on? Is that moth’s corpse going to cause a fire while I’m sleeping? I won’t be able to get a gold rated PSU for at least a few more days. Is it possible to rip out the LED that glows up the blue light so his moth brethren won’t get sucked into the same trap as he was? Should I shut it all down?
Sorry for the weird questions guys. I have laid the case side back on where it is supposed to be but it isn’t snapped into the frame, just laid on top, and the PSU is still super bright neon blue...
Please help, thanks
Edit: also if anyone had a suggestion for PSU that’s good for 24/7 uptime for around $120, that would be great.
submitted by Pendulous_balls to buildapc [link] [comments]

How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS CPU mining on Linux(Ubuntu) operating system using ... Best Coin To Mine With A CPU In 2020  Pegnet Mining Guide How to mine Bitcoin Using Linux [2019] - YouTube How to mine Bitcoin with Linux to get 0.01 BTC

Bitcoin mining on headless Ubuntu 12.04 server [duplicate] Ask Question Asked 6 years, 8 months ago. Active 6 years, 6 months ago. Viewed 3k times 2. This question already has answers here: In the ASIC-age, is it worth starting mining Bitcoin at home? (2 answers) Closed 4 years ago. I've googled a lot and also read threads here but I'm still struggling. Background: I'm a eager but novice Linux ... I will be using the beta version of 18.04 since this is the future OS for the Ubuntu server, and I need to write this article for Ubuntu 18.04. I DO NOT suggest using a beta version for your mining computer, so it may be best to just wait until the official Ubuntu 18.04 server is released. I am just using the beta so I can write the tutorial ... Um Bitcoin Mining zu betreiben, müssen Sie einem Miningpool beitreten, was zusätzliche Kosten verursacht. Für das Mining benötigen Sie entsprechende Hardware. Auch hier kommen Kosten auf Sie zu. Je nachdem, wie leistungsfähig Ihr Bitcoin Miner sein soll, zahlen Sie bis zu 2.000 Euro. Es ist nicht bekannt, ob sich Mining auch in Zukunft noch lohnen wird. Wenn Sie nicht genau wissen, was ... 4. EasyMiner. EasyMiner is a GUI based software and it acts as a convenient wrapper for CGMiner and BFGMiner software.. EasyMiner can be used for solo mining, CPU mining, cuda mining, pool mining etc and it supports the stratum and getwork mining protocols. When available, it automatically uses AVX, AVX2, and SSE2. 5. BitMinter. BitMinter is a mining pool that wants bitcoin mining to be easy ... Bitcoin is a digital currency based on Blockchain technology with sha256 Algorithm and works on Proof of Work. The blocks are generated by POW technology. 1. Go to https://blockchain.info/wallet/ 2…

[index] [48114] [10586] [14530] [27055] [13543] [31296] [17237] [2242] [43771] [49046]

How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS

Binance - https://www.binance.com/?ref=12803159 Hashflare with 63 days to break even, 1-year contract - https://hashflare.io/r/AB31B34E Bitclub Network 5% re... Get an additional $10 in Bitcoins from Coinbase when purchasing through my referral link http://fredyen.com/get/Bitcoins Raspberry Pi: http://amzn.to/2l6yrW7... This video will demonstrate how to create an account at minergate and how to mine bitcoin using the CPU of a computer running Ubuntu linux. Mining equipment Checklist • Power supply 500w - http ... This video will demonstrate how to mine bitcoin in Linux. MINERGATE LINK: https://minergate.com/a/e13126b573b894c64393990a Bitcoin Donation : 3HNH19ss5Fd1j8j... How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. Setup ...

#